broom broom Posted April 9, 2006 Report Posted April 9, 2006 Drivers doors been causin me a few probs mosy obvious was the door lock not workin properly ( unlocks itself when you take the key out the lock ) and the window wouldn't go down took the door panel off to see about the window as its not good for drive through :) and the multi plug seemed to be loose sorted that and hey presto the window went up and down again ...... that was short lived had it down today and it wouldnt go back up! so door panel off again and i realised that the speaker on the door didnt work either so am now thinking it could be the wiring loom ???? as when ya shoogle it aboot a bit it works managed to get the window back up doing that . Just wondering peeps if that could cause the problem with the lock as well???? :) Quote
broom broom Posted April 10, 2006 Author Report Posted April 10, 2006 Any idea if the wiring loom is easy to fit?? Quote
NikpV Posted April 10, 2006 Report Posted April 10, 2006 I think to remove the rubber boot covering the wires you need to quarter(or half) turn the plastic grommets and withdraw from door and pillar Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.